Product Experts Available Now!
Call 1-800-940-8924
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
(58 reviews)
Price: $501.83
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
Part Number: RR23QX
In Stock
$501.83
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (58)
- Q & A (0)
- Photos
RV Ride Control Trailer Suspension Parts - RR23QX
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.
Features:
- Corrects misaligned axles and lifts trailer for level towing
- Improves the life of your tires and creates a more stable ride
- Provides extra clearance so you can tow with your tall or lifted vehicle
- Lets you move axle up to 1/2" forward or 1/2" rearward for proper alignment
- Adjusts in 1/4" increments
- Raises trailer height by 1-1/4" or 2-1/4"
- Additional single axle kit needed for full 2" lift to install on center brackets
- Works with your existing leaf spring suspension system
- Brackets attach to hangers and supply new, lower mounting point for springs, which results in a taller ride height
- Alignment correction plates mount on either side of hangers to shift axle placement
- Includes 8 suspension plates, 8 alignment correction plates, and the hardware needed for installation
- No drilling required
- Made in the USA
Specs:
- Application: tandem-axle trailers and RVs with leaf spring suspensions
- Minimum required distance from I-beam to spring mounting hole on hanger: 2-5/8"
- Works with 3" wide x 3-3/4" tall hangers or 3" wide x 5" tall hangers and leaf springs up to 2" wide
- 90-Day warranty
Notes:
- This does not work with MORryde CRE3000 equalizers.
- If you want 2" of lift you will need an additional single axle system for the center brackets.
Raise Your Trailer's Ride Height
Newer trucks are being built to ride higher. This means that your trailer may have to be raised to match. If the two aren't the same height at the connection point, the nose of your trailer or RV is going to ride too high. This will put too much weight on the rear of your trailer, which can result in poor handling and may eventually cause damage.
The Correct Track helps to solve this problem by lifting your trailer or RV 1-1/4" or 2-1/4", which provides a level towing setup for taller trucks. This added lift is also great for 5th-wheel trailers that might have trouble clearing tall pickup bed side rails.
Correct Misaligned Axles and Suspension
If the tires on your RV or trailer are wearing down quickly and prematurely, there's a good chance your axles are out of alignment. Driving with misaligned axles for long periods of time will shorten the life of your tires, reduce your gas mileage, and can make it difficult to steer your rig. Misaligned axles are often caused by an imbalance of weight, which can result from simply using the slide-out on your 5th wheel or having heavy appliances positioned on one side.
The Correct Track integrates into your trailer's suspension system and shifts the axles back into proper alignment. This kit allows you to adjust the axle alignment by 1/4" increments for a properly aligned suspension. It will correct your RV or trailer's alignment whether the axles need to be moved forward or backward.
9005934 Correct Track Trailer Alignment and 1-1/4" or 2-1/4" Lift Kit - Dual Axle
Installation Details
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.3
58 reviews
by:
Tony
09/05/2026
With the shape of the hangers on our hitchhiker II, this wasn't a direct bolt on kit as it was designed. However, this was not an issue with a bit of planning, some select drill bits and a welder, I had the kit installed and axles aligned. This is a nice kit that offers a lot of fine adjustments.
by:
Scott
05/21/2026
After I had this installed my 5th wheel was level and pulls like a dream. I can take my hands off the steering wheel and my truck and 5th wheel do not move. Everything is aligned perfectly. I highly recommend this product for anyone that has trouble getting their new 2500 silverado to level out with their older 5th wheel. I gained almost 3 inches in height on my 5th wheel with this product.
by:
MDG
01/06/2025
Easy install did in an afternoon.
Two problems (errors by me) .
1. MARK with BRIGHT PAINT MARKER the correct hole on the adjustable spacer including which side goes out. (would be nice if they were labeled) I reversed one and had to go back and fix it. Took about 15min to swap the position.
2. Be sure to predrill the self-tapping position screws. I did.- and even there I snapped the head off one.
Suggestion- Order replacement bolts that are ported for grease fittings, (20$ at your auto parts store) you will need two per axel.
When you are done you can check if your work is matching your desires by looking at the bolts and are they in the middle front or rear of the alignment channel at the bottom of the spacer
All told raised my 5th wheel 1”
Corrected my rear axle from under ½ inch error to 1/16 the out of parallel.
Two problems (errors by me) .
1. MARK with BRIGHT PAINT MARKER the correct hole on the adjustable spacer including which side goes out. (would be nice if they were labeled) I reversed one and had to go back and fix it. Took about 15min to swap the position.
2. Be sure to predrill the self-tapping position screws. I did.- and even there I snapped the head off one.
Suggestion- Order replacement bolts that are ported for grease fittings, (20$ at your auto parts store) you will need two per axel.
When you are done you can check if your work is matching your desires by looking at the bolts and are they in the middle front or rear of the alignment channel at the bottom of the spacer
All told raised my 5th wheel 1”
Corrected my rear axle from under ½ inch error to 1/16 the out of parallel.
by:
Brian
09/01/2025
I’m not sure why if they have something in stock, it takes so long to get. Why wouldn’t you offer an expedited shipping option, the customer might need or want it in a timely manner. Horrible directions come with it. Even the Installation Details on their website is Horrible, directions and Inspections are two different things. Also, for a Tandem Axle lift kit, why would you not want to add something for the center hanger that holds your Equalizer, but that’s just my opinion. There Self Drilling Screws aren’t really designed to self tap through a trailer hanger, I’d recommend a pilot hole.
by:
Thomas
05/25/2022
I was having a problem with the brakes on one wheel failing (magnet/actuator), even after replacing the entire brake assembly. Upon measuring the axle alignment to the hitch ball I discovered that the axles were out of alignment. This kit corrected the problem and I am no longer having brake problems, or excessive tire wear. The trailer tracks much better. I am very satisfied with the product. Installation on two axles took about 3-4 hours.
by:
Michael
03/26/2023
ETrailer is the best, but these things took TIME to figure out and get the axles aligned correctly! They did the job, lifting the RV up from the tires, and no more tires scraping the fender well on rough/bumpy roads. Have 2 people and a weekend available to get the kit installed correctly and aligned. Tires are running great with even wear. Thank you!
Michael
3/27/2024
So, far even with chug holes and some rough interstate pavement, no more tire rubbing on the upper part of my self-made wheel wells. The Lift Kit has worked great!
by:
Scott
04/02/2025
Purchased a year ago for a new duel axle enclosed trailer. From the factory, this trailer was out of true. I was replacing tires every couple thousand miles. This fixed it all. I would recommend.
by:
David
07/07/2025
for my trailer is was not direct bolt. mount on trailer was angled and had to cut grove to fit.
by:
Michael
07/12/2025
This product did just what we needed - it gave us an extra approx 2.5 inches of height on our trailer. It did take some time and effort to install - so plan on hours. It has worked perfectly though - no problems. I recommend.
by:
Marcel
08/16/2023
Horrible product.. from the beginning I had problems with delivery. they changed the delivery date 3 times. when the product arrived at my house I was not present because I expected to use it before. and when using the product I realized that if it would not work. I took it in for installation and the mechanic tried several ways to find a safe position for it but . when I finished the installation and the weight of the trailer came down, the parts with the holes rotated and that brought me a loss of 2 tires. because they started to rotate crooked! In the end, completely dissatisfied with the product. and in the end I never knew what day I received the product and then I never knew when I would have the opportunity to return the product since I felt harmed by the situation! when calling the store they said my refund window closed 2 days ago! very strange. So far completely unsatisfied
Jenny N.
8/31/2023
It is very unusual for the holes to rotate once this is installed. The manufacturer will be in contact to discuss this with you.
by:
Brian
09/04/2024
It CAN work with the Moryde CRE3000 suspension! For obvious reasons etrailer cannot and will not advise on making any modifications to this product and in doing so you are likely forfeiting any chance at returns or exchanges. I spent plenty of time researching best I could before pulling the trigger on this because I didn’t want to replace my perfectly good Moryde CRE3000 stabilizer unless I absolutely had to or the modifications would be too much work than it was worth. I’ll include as much information as I can.
Install of the product itself was super easy! Just unbolt the springs, attach correct track brackets and slip the springs right back in!
When it came to installing the equalizer shackle braces, modification IS REQUIRED! (Refer to photos). This requires an angle grinder for you to trim off a short section of the curled edges in order to clear the body of the CRE3000 stabilizer, while still maintaining some sort of edge to the plate to hold the adjustment block square, and cut the corners off of the adjustment plates to clear the tabs on the CRE3000.
I had wet bolts installed and the correct track kit will not host the wet bolts due to added plates needing longer bolts. I opted to replace only the 6 bolts I needed (part no. MR52HR), however they do make full wet bolt kits to work with the correct track (you would need the # MR58ZR for 2-1/4" and # MR98ZR for 3-1/8".)
I got everything installed and when it came time to check for axle alignment I found my axles were already perfectly square with towing direction of kingpin, and parallel with each other.
I can’t thank the customer service members of etrailer enough for putting up with a lot of my questions on other postings and helping me get as much info as I could. As they mentioned to me and it bears repeating, if you decide to modify this kit in any way, that’s a “you” decision and they can’t advise on that.
Trailer info: 19’ Dutchmen Voltage 3705 toy hauler. Tandem Lippert 7K axles, springs mounted on top of axle, Moryde CRE3000 equalizer with Moryde Suspension upgrade wet bolt kit.
Install of the product itself was super easy! Just unbolt the springs, attach correct track brackets and slip the springs right back in!
When it came to installing the equalizer shackle braces, modification IS REQUIRED! (Refer to photos). This requires an angle grinder for you to trim off a short section of the curled edges in order to clear the body of the CRE3000 stabilizer, while still maintaining some sort of edge to the plate to hold the adjustment block square, and cut the corners off of the adjustment plates to clear the tabs on the CRE3000.
I had wet bolts installed and the correct track kit will not host the wet bolts due to added plates needing longer bolts. I opted to replace only the 6 bolts I needed (part no. MR52HR), however they do make full wet bolt kits to work with the correct track (you would need the # MR58ZR for 2-1/4" and # MR98ZR for 3-1/8".)
I got everything installed and when it came time to check for axle alignment I found my axles were already perfectly square with towing direction of kingpin, and parallel with each other.
I can’t thank the customer service members of etrailer enough for putting up with a lot of my questions on other postings and helping me get as much info as I could. As they mentioned to me and it bears repeating, if you decide to modify this kit in any way, that’s a “you” decision and they can’t advise on that.
Trailer info: 19’ Dutchmen Voltage 3705 toy hauler. Tandem Lippert 7K axles, springs mounted on top of axle, Moryde CRE3000 equalizer with Moryde Suspension upgrade wet bolt kit.
by:
David
02/10/2023
This kit made a huge difference in the height of my 5th wheel, it is now level and also gives my rear leveling jack some extra clearance. Pretty easy to install, the first one will take a little bit of time, but the reat will go faster. I also installed the heavy duty shackles and the Road Armor Equalizers. This all made my RV ride so much better!
by:
Kenneth
10/05/2025
excellent product and easy to install. I am very happy with this product
by:
Steel
11/10/2024
The Triple Axle Kit costs less and includes three boxes instead of two, as with the tandem axle kit. However, the instructions could be clearer. I’d recommend choosing a triple axle set even if you’re working on a tandem axle, so you can adjust each hanger individually and maintain the correct spring angles. Otherwise, if you only install it on the center and rear hangers, you’ll need to adjust both the center and rear if you need to tweak the front right wheel, which can be tricky to get right. Alternatively, buying two single-axle kits could save you around $150 and simplify the setup.
Steel
12/4/2025
Works great! No complaints!
by:
Daniel
05/08/2023
Well unfortunately I was not able to use this product it was not applicable to my trailer but all I know is the service and the help that I got from the people that e trailer was awesome I will not shop anywhere else if I don't need to
Daniel
5/9/2024
This product has helped us tremendously because of where we live. We are in mountainous country my driveway is hard to get into and this lift kit and the shock absorbing equalizer kit has made our trailer awesome. I would recommend it to everyone that has a bumper pull fifth wheel double or triple axle trailer you will love it
by:
Eric
05/07/2024
I have not installed the kit yet. The ordering process was easy and had plenty of information to make sure it was what I needed. The delivery date estimated during the order process was not accurate. The delivery date during the order process stated it to be the end of April. A few days after the date had passed I received a notification saying the order was being gathered and was expected to ship May 1. I received the order on May 6. This is not a huge issue, but with porch pirates these days, I make plans based on the stated date when ordering.
*** That being said, I have always had great great experience with eTrailer and is my go to for specialty and towing items. I am grateful for the detailed answers, videos and feedback they have for their customers. ***
*** That being said, I have always had great great experience with eTrailer and is my go to for specialty and towing items. I am grateful for the detailed answers, videos and feedback they have for their customers. ***
by:
Mitchell
09/09/2021
Installing this kit on my travel trailer corrected my dual axle alignment problem which was wearing the inside of the left rear tire. It was easy to install, easy to understand, and very adjustable.
by:
AlfredRVer
06/30/2024
It raised my camper to better match the height of my truck. Also, I was able to align the axles for more even tire wear.
by:
James
09/04/2025
Reason for the 3stars,product has not been installed
by:
Benjamin
09/23/2022
Product is great. I just wish the instructions addressed tandem and triple axle applications. And some actual pictures of installation would be even better.
by:
Ronald
01/29/2023
I can’t review the product since installation is not scheduled until Friday. I have ordered fro eTrailer because I like their service, customer service and quick ship and deliver.
by:
K
06/11/2022
Used this to lift my fifth wheel 2 inches to reduce the nose height condition that is common with newer trucks. Not as easy as changing a tire though.
by:
Steve
06/09/2023
Price was good and it was in stock.
I was confused why it took four days to ship when it was pulled the second day?
I ended up not being able to use it before I left on a six-week excursion.
Looking forward to getting back home and installing the product.
I was confused why it took four days to ship when it was pulled the second day?
I ended up not being able to use it before I left on a six-week excursion.
Looking forward to getting back home and installing the product.
Jenny N.
6/12/2023
To be honest it looks like there was a hiccup when the order was sent to the warehouse. We did not have the kit on hand to ship right way and needed to wait til our next shipment came in which was just in a few days.
by:
Ryan
12/03/2022
The product looks great and seems very well made. I have not been able to install on my own and I have tried with two different shops to install this system on my RV and they will not.
by:
Donald
09/08/2022
I have not had a chance to install them yet, but they seem to be exactly what I need.
25
58
true
Show More Reviews
See what our Experts say about this RV Ride Control Trailer Suspension Parts
- What Trailer Lift Kits Will Work with the MORryde CRE3000 EqualizersI do still have a few options for lifting the trailer but the Correct Track Trailer Alignment and Lift Kit part # RR23QX is indeed incompatible with the MORryde CRE3000 Equalizers. Therefore, you can either change these out to standard ones like the Curved Equalizer for 1-3/4" Wide Double-Eye Springs part # TREQE1 or look into an axle over conversion kit. That said, this option only works for you if the leaf springs are under the axle. If so, I recommend the Dexter Trailer Springs Over-Under...
view full answer...
- Does Correct Track Trailer Alignment Kit # RR23QX Come with Enough Brackets for Tandem TrailerThe Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since the center has an equalizer which might be why it's hard to visualize how it all goes together looking at the product pictures.
view full answer... - Is Correct Track Trailer Alignment and Lift Kit Compatible With MORryde Suspension Upgrade KitIf you install the Correct Track Trailer Alignment and Lift Kit # RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find the right MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track you will need the center to center bolt hole measurement from your current shackle straps. If you have 2-1/4" shackles you need the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track # MR58ZR. If you have 3-1/8" you need the # MR98ZR...
view full answer... - How To Get Full 2-1/4" Lift With Correct Track Trailer Alignment and Lift Kit For Tandem Axle RR23QXHey Richard, great question. To get the full 2-1/4" lift on a tandem axle setup, you actually need the triple axle kit part # RR55QX instead of the # RR23QX tandem axle kit. You could also achieve this by getting the tandem axle kit, and an additional single axle kit, but the triple axle kit is much more cost effective compared to ordering two kits. The triple axle kit will have enough brackets to do the full 2-1/4" lift on all 6 hangers. I know its a little odd/confusing but this is...
view full answer... - Recommended Lift Kit for a Grand Design Reflection 150 Model 270BNSince your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and Lift Kit item # RR23QX. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4". This method of lifting your trailer will not void the Lippert frame warranty because this kit bolts to your existing hangers and just lowers the connection points to the leaf springs.
view full answer... - Correct Track Spring HangersThe hangers will vary depending on the exact suspension set up from the manufacturer. With different spring combinations and number of axles used this will cause different parts to be required. These spring hangers are designed specifically for the Correct Track System as replacements for damaged parts. Hanger # LC303918 is 5" tall. Hanger # LC303917 is 4" tall. If you are looking to change a suspension system to the Correct Track, their product line has been discontinued. I hope this...
view full answer... - 2 inch Lift Kit for Jayco 5th Wheel with MORryde CRE3000 Cushioned EqualizersThe Lippert tandem axle lift kit part # RR23QX does not work with your MORryde CRE3000 suspension kit # MR87ZR.
view full answer... - How to Raise Height of 2020 Grand Design Reflection 150 260RD 5th Wheel By 2 InchesThanks for reaching out! To lift your 2020 Grand Design Reflection 150 260RD 5th Wheel so it's 2" taller I recommend using the Correct Track Trailer Alignment and Lift Kit # RR23QX. This installs using the same frame mounting brackets that you already have - all you're doing is adding an extra piece of material make the mounting brackets "longer" for lack of a better term. This is a very simple, yet effective, way to increase the height of your trailer to what you're needing!
view full answer... - Best Ways To Raise a Trailer for More Tire ClearanceI have two options for you to raise your trailer and gain more clearance between the fender and tire. The most cost effective option would be to flip the axles with a Dexter Trailer Springs Over-Under Kit part # K71-384-00 or part # K71-385-00. That said, this option will only work if your axles are above the leaf springs. If your axles are not above the leaf springs then your only other option would be to use the Tandem Axle Lift Kit part # RR23QX. I am not really sure what you mean by...
view full answer... - Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When TowedWe have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part # RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest solution to your situation.
view full answer...
- Solution for 2024 Keystone Montana High Country 295RL that Sits Nose HighHey Michael, so the Curt Trailair part # LC155943 that you referenced was not designed to offer a different ride height from the pin boxes it replaces so it would not be the way to go if you were wanting to make a height adjustment. What I would do is try the higher mounting bolts like you mentioned and see if that gets your trailer level while also keeping at least 6 inches of clearance between the bed rails and the trailer overhang. If that still does not fix the problem then you'd need...
view full answer... - Recommended Lift Kit for 8,000 lbs Axles Hey Josh! If you have 8,000 lbs torsion axles I do not have a lift kit for you. I do have a couple of options for standard axles though. If your 8,000 lbs axles are mounted above your springs you can use the Dexter Trailer Springs Over-Under Conversion Kit item # K71-385-00. This kit works by moving your axle below your springs and gives you a lift equivalent to your axles thickness. You'll need two sets. If your axles are already below your leaf springs the only option is the Correct...
view full answer... - Why Can't Correct Track Lift Kit be Used with MORryde CRE3000Hey Brian, I believe you are asking about the Correct Track lift kit part # RR23QX and why it can't be used with the CRE3000 kit like part # MR87ZR. The clearance issue is the square brackets of the Correct track that would need to attach to the outsides of the CRE3000 but the angled brackets on the silver part of the CRE3000 prevent the square bracket from being able to sit flush with the equalizer. That's why the cushioned equalizers that do work like the part # LC279688 have a totally...
view full answer... - How To Increase Bed Rail Clearance When Pulling 5th Wheel Camper With 2024 Ford F-450Hey Ryan, thanks for reaching out. Switching from your MORryde pin box to the Gen-Y Executive gooseneck won’t automatically give you more bed-rail clearance. Both pin boxes use the same bolt pattern and ride in roughly the same vertical space, so you don’t really “gain” height by swapping. Sometimes the Gen-Y sits a touch different, but not enough to treat it as a fix. That said, the correct Gen-Y Executive hitch for your camper is the following: - Gen-Y Hitch Shock Absorbing 5th Wheel...
view full answer... - Recommended Alternative for a Lippert Correct Track Trailer Alignment and 2" Lift Kit Yes, they have Dan. The alternative to the Lippert Correct Track is the Correct Track Trailer Alignment and Lift Kit item # RR23QX and item # RR55QX. These kits include brackets that attach to the spring hangers and lower the attachment point for your suspension. To lift a tandem axle trailer 1-1/4" you'll need the Correct Track item # RR23QX. If you want to lift your tandem axle trailer 2-1/4" you'll need the Correct Track item # RR55QX. The triple axle kit comes with the additional...
view full answer... - Parts Needed To Lift A 5' x 8' Carry-On Trailer Hey Chris, You can flip the axle by just welding on new seat springs to the axle. Dexter has kits for this that include new u-bolts for 2-3/8" # K71-384-00 or 3" # K71-385-00 diameter axles. If you have a smaller axle just let me know and I can look up the parts you'll need.
view full answer... - Lift Kit for Trailer With Stealth Trailer that Has Tandem 3,500 lb Lippert AxlesDoes you trailer have leaf springs or torsion springs if you look underneath it? Any idea what the axle capacity is?
view full answer... - How To Raise a 5th Wheel Trailer To Sit Level With a Ford F-350Yes, the Tandem Axle Lift Kit part # RR23QX is the solution to your problem which is to raise the trailer in order to sit level with the tow vehicle. This problem is actually very common nowadays as trucks continue to sit higher and higher which is why aftermarket lift kits such as the above are available. The Tandem Axle Lift Kit is easy to install so you should not have to pay someone to do this for you or at least not very much and you don't have to worry about voiding the vehicle's...
view full answer... - How Do You Adjust the Height Of the B&W Companion OEM for Ram TrucksIn order to adjust the hitch head height of the B&W Companion OEM 5th Wheel Trailer Hitch part # BWRVK3670 you will need to remove the pivot arms and then reinstalled them using either the top, middle, or bottom set of bolt holes. I have attached a portion of the install instructions that go over this process for you. If the provided hitch head height adjustments do not allow you to tow your trailer level then you may need to raise the trailer. For this, we have the Tandem Axle Lift Kit...
view full answer...
- What Would Cause Keystone Carbon 358 Suspension to SagHey Shawn, is it possible your leaf springs are just worn out and due to that your suspension is sagging and causing the tires to rub? Doing and over under kit and then trying to go with softer springs to offset the additional height would not be recommended and it certainly wouldn't change the height by 1-3/4 inches. We also have Timbren kits for trailer suspension like with the part # TTRA1032 which will give you additional support too to prevent the rubbing. Did you by chance increase...
view full answer... - Would upgrading the leaf springs on my camper increase the height of the camper?You're not wrong Lane but I have 2 options that would work a bit better for what you're wanting to do. When you swap leaf springs, you’re mostly just reducing sag under load. That can help a little, but it usually won’t give you the height gain you’re looking for. Since your goal is to raise the camper, you’ll get much better results with a Correct Track kit or an over/under conversion. Correct Track Trailer Alignment and Lift Kit for Tandem Axle # RR23QX lets you raise your trailer...
view full answer... - Lift Kit Solution for 2003 Big Foot 25B21RB to Provide 2 inch LiftHey Stuart, we actually have just what you are looking for with the Correct Track tandem axle lift kit part # RR23QX which will give you a lift of 2-1/4 inches like you are looking for. This basically adds spacers to the hangers of your current suspension which provides the lift.
view full answer... - Can I Add Height By Upgrading Leaf SpringsYes, but it's going to be an extremely small amount and you'll need to add springs that have more leafs than your current ones. You'll get maybe 1/4" to 3/8" per leaf of lift. If you could get the weight off of one side of your trailer and measure the leaf springs from the center of the mounting hole on one side to the other, I can recommend a replacement for you. I'll also need to know how many leafs you have. You can add this information and any other questions you have where it says...
view full answer... - Should Equalizer Hanger Be Installed First for Correct Track Trailer Alignment and Lift KitThanks for reaching out about the Correct Track Trailer Alignment and Lift Kit # RR23QX, Mike! The instructions only mention adjusting the front axle before the rear axle, but I agree with you - the middle hanger that holds the equalizer will need to be installed first so that everything else can be lined up correctly.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Bradley B
Expert Research:
Jameson C
Video by:
Dustin K
Video by:
Jonathan Y
Video by:
John S
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Manda E
Written by:
Mike S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thomas
5/26/2023
After 2 years and 3300 miles, product is still working as expected. Completely solved the problem of tire wear, and excessive brake heating which lead to brake failure. Very happy with product.